Datos técnicos

Accesorios

Cuchillas

Información

Technical data

Through-feed and out-feed from the machine. The five powerful feed rollers also surpass expectations when it comes to feeding resinous and wet wood. Mechanical variable gear for setting feed rate from 3 m/min (10 ft/min) to approximately 30 m/min (98 ft/min).

Knives and cutters factory mounted for four-sided dimensional planing. Top- and bottom cutters are combined straight planing cutters and moulding knives. Both functions can be used simultaneously. You can also straight plane and mould from all four sides in one step. All machines have been test run before shipping.

The machine is easy to set between processing runs. It normally takes about 20 minutes to reset the machine from one mould to another. Logosol has a catalogue with over 500 different moulding knives to choose from.

Moulding dimensions

4-sided moulding
Width: 360 mm (14”)
Height: 10 to 130 mm (7/16” to 5”)

2-sided moulding
Width: 410 mm (16 3/16”)
Height: 10 to 230 mm (7/16” to 9”)

Straight planing (assembly required)
Width: 510 mm (20”)
Height: 230 mm (9”)

Top horizontal cutter

Diameter: 88 mm (3 1/2")
Width: 510 mm (20”)
Output: 5.5 kW (7.5 hp)
Rotational speed: 7000 rpm
Take-off when planing: 0-8 mm (0–5/16”)
Take-off when moulding: Max. 20 mm (3/4”)

Bottom horizontal cutter

Diameter: 72 mm (2 7/8")
Width: 410 mm (16 3/16”)
Output: 4 kW (5.5 hp)
Rotational speed: 7000 rpm
Take-off when planing: 0-8 mm (0 to 5/16”)
Take-off when moulding: Max. 10 mm (7/16”)

Side cutters

Diameter of spindle axel: 30 mm (1 1/5")
Cutter height: Max. 130 mm (5”)
Diameter: Max. 140 mm (5 1/2”)
Output: 3 kW (4 hp)
Rotational speed of side cutters: 7,000 rpm
Cutting depth: Max. 30 mm (1 1/8”)

Included side cutters

Quantity: 2
Type: TB90
Diameter, body: 90 mm (3 1/2")
Height, body: 40 mm (1 1/2”)
Cut, type: Planing knife HSS
Cut, width: 50 mm (2”)

Feed, planetary variator

Output: 0.75 kW (1 hp)
Feed rate: 3-15 m/min or 6-30 m/min (11-52 ft/min or 20-98 ft/min)

Electrical system

Total output: 16.25 kW (22 hp)
All motors are equipped with overheating protection.

Electrical connection

3-phase, 400V, 32 A

US: 3-phase, 220V, 60 A

Dimensions and weight

Length and width: 2970 x 1125 mm (117" X 45”)
Height: 1430 mm (56”)
Weight: 600 kg (1322 lbs)